Stratum 3, 3E or 2 Innovative TDM over Packet Synchronization solutions
Description:
The IPSync is an innovative, state of the art synchronization solution for the next generation asynchronous Telecom Transport networks. The IPSync guarantees the excellent QoS achieved by TDM, despite of using a non- synchronous network such as IP or Ethernet infrastructure. The IPSync is based on edge technology and highly efficient algorithms and digital PLL that performs the signal processing required to provide output frequencies, based on the received data in order to supply all component in the network element with a clean jitterless clock that is full synchronized to the remote Master network element. As per the required Stratum Level.
Applications:
Any TDM transport over Packetized Network – Ethernet and IP
Cellular Networks – Base Stations, and backbone nodes
Core switches and access IP networks
Bit Integrity Maker in all networks. 2 Available Options:
A complete Stratum level - for a stand alone synchronizer in a NE.
G.823/ G.824 compliant only (low cost) – for a system that provide a Stratum 3 signal for a network element that can take care of synchronization from it – usually a legacy equipment, that need a G.823 input signal.
Features:
Size: 2 X 2 X 0. 5 for the DSP part a credit card sized for the networking part
3.3V or 5V single power source
Full compliant with the following Standard recommendations:
Telcordia GR- 1244- CORE -Stratum 3/ 3E/ 2
Telcordia GR- 253 -CORE -Stratum 3/ 3E/ 2
IEEE – 1588 (Optional)
ITU- T G. 812 Type II/ III/ IV
Low profile, 0.5" max height (for 3E/ 2 with off- board oscillator only)
8 KHz output coherent with main output frequency.
A Variety of output frequencies as per the customer request.
Continuous monitoring including frequency measurements of all input references.
